Applications
Match the machine to the workpiece
The same 100 kVA machine behaves differently on 0.8 mm radiator sheet and 2 mm body brackets. These notes explain how the process and settings change with the part, so you can shortlist before asking for a quote.
Application example01 / Industry
Automotive parts and body assemblies
Brackets, seat frames and body panels are welded on coated and high-strength steel, where weld time has to stay short and the nugget still has to pass peel and chisel checks.
- Typical workpieces
- Chassis and seat brackets · Body panels and reinforcements · Exhaust hangers and mounts
- Recommended machines
- SY-MFDC 100 · SY-SUS 63 · SY-NF 8
- Process notes
MFDC with closed-loop current control holds nugget size as electrode tips wear through a shift.
Suspended guns reach internal ribs on panels that cannot be lifted onto a fixture.
Application example02 / Industry
Home appliances and metal housings
Appliance panels, housings and shelves combine spot welds on visible surfaces with projection-welded nuts inside the part, so electrode marking and nut position both matter.
- Typical workpieces
- Housings and side panels · Welded nuts and studs · Shelves, brackets and hinges
- Recommended machines
- SY-PRO 160 · SY-MFDC 100 · SDM-60
- Process notes
Projection welding with a nut feeder places and welds in one cycle, removing a manual step.
Seam welding is used where a housing or tank joint has to be leak-tight.
Application example03 / Industry
Wire mesh, fencing and shelving
Mesh producers weld a fixed pattern thousands of times per shift, so pitch repeatability and electrode changeover time decide the real capacity of the line.
- Typical workpieces
- Welded mesh panels · Fencing and gabion panels · Shelving and storage grids
- Recommended machines
- SY-MESH G2 · SY-PRO 160
- Process notes
Servo pitch control keeps mesh size in the recipe so changeover does not need mechanical re-setting.
Multiple transformers across the gantry weld the full mesh width in one stroke.
Application example04 / Industry
Radiators and heat exchangers
Plate radiators and heat exchanger panels are joined on long seams that must hold pressure, so roller pressure and travel speed have to stay constant along the whole joint.
- Typical workpieces
- Plate radiator panels · Tank shells and covers · Heat exchanger plates
- Recommended machines
- SDM-60 · SY-PRO 160
- Process notes
Seam welders keep speed constant from the first to the last section, which keeps the seam sealed.
Pressure is set per sheet thickness to limit marking on visible panel faces.
Workpiece first
Send a photo of the part and the material grade
For automated lines, include the fixture idea and how many parts per shift. That is what decides the layout.