
Automotive parts and body assemblies
Brackets, seat frames and body panels are welded on coated and high-strength steel, where weld time has to stay short and the nugget still has to pass peel and chisel checks.
View application
MFDC spot welders
MFDC spot welder
A 100 kVA medium-frequency inverter spot welder with closed-loop current control. The 1 kHz output reaches set current quickly, which keeps weld time short on galvanised and high-strength sheet where heat input has to be limited.
Specifications describe this series. Confirm the final configuration, gun and spares list with the export desk before ordering.
Features
Closed-loop current control holds the set kA as cable length and electrode wear change during a shift.
Weld, forge and hold times are set separately, so coating damage on galvanised sheet can be limited without losing nugget size.
Up to 32 weld schedules are stored, matching the part numbers that run on one line.
Specifications
| Rated capacity | 100 kVA |
|---|---|
| Input voltage | 3-phase 380 V ±10%, 50/60 Hz |
| Secondary current | up to 18 kA (reference) |
| Inverter frequency | 1 kHz |
| Duty cycle | 20% |
| Weld time range | 0–1000 ms, 1 ms step |
| Cooling | Water-cooled transformer and electrodes |
| Weight | 180 kg (power source) |
Reference values for this series. Final values are confirmed on the order confirmation.
Where it is used

Brackets, seat frames and body panels are welded on coated and high-strength steel, where weld time has to stay short and the nugget still has to pass peel and chisel checks.
View application
Appliance panels, housings and shelves combine spot welds on visible surfaces with projection-welded nuts inside the part, so electrode marking and nut position both matter.
View applicationRelated equipment

Suspended spot welders
Suspended spot welder
Reach across large panels without moving the part

Seam and roll welders
MFDC profile seam welder
Leak-tight seams with controlled roller pressure