
Wire mesh, fencing and shelving
Mesh producers weld a fixed pattern thousands of times per shift, so pitch repeatability and electrode changeover time decide the real capacity of the line.
View application
Projection and butt welders
Butt welder
A 100 kVA butt welder for joining wire, rod and small sections end to end. Clamping and upset force are set per section size, which keeps the joint aligned and the burr consistent.
Specifications describe this series. Confirm the final configuration, gun and spares list with the export desk before ordering.
Features
Pneumatic clamping holds both sections aligned before the upset stroke starts.
Upset force is set per rod diameter, so joints from 6 to 20 mm run without changing the fixture.
Flash and burr are controlled by adjustable stroke length rather than operator timing.
Specifications
| Rated capacity | 100 kVA |
|---|---|
| Input voltage | 3-phase 380 V, 50/60 Hz |
| Welding diameter | 6–20 mm (reference) |
| Clamping force | up to 30 kN |
| Upset force | up to 40 kN |
| Duty cycle | 20% |
| Cooling | Water-cooled transformer and clamps |
| Weight | 750 kg (reference) |
Reference values for this series. Final values are confirmed on the order confirmation.
Where it is used

Mesh producers weld a fixed pattern thousands of times per shift, so pitch repeatability and electrode changeover time decide the real capacity of the line.
View application
Plate radiators and heat exchanger panels are joined on long seams that must hold pressure, so roller pressure and travel speed have to stay constant along the whole joint.
View applicationRelated equipment

Projection and butt welders
Long-arm projection welder
Welded nuts and brackets on deep-drawn parts

MFDC spot welders
MFDC spot welder
Short weld times on coated and high-strength steel