
Automotive parts and body assemblies
Brackets, seat frames and body panels are welded on coated and high-strength steel, where weld time has to stay short and the nugget still has to pass peel and chisel checks.
View application
Automated lines and feeding
Nut and bolt feeder
A vibratory feeder and placement unit that presents welded nuts or bolts to the electrode position, interlocked with the welder cycle. It removes the manual placement step that limits cycle time on panel work.
Specifications describe this series. Confirm the final configuration, gun and spares list with the export desk before ordering.
Features
Bowl and track are tooled for the nut or bolt size in the order, not a universal track.
Placement is interlocked with the weld cycle so a nut cannot be welded out of position.
Low-level sensor stops the cycle before the track runs empty.
Specifications
| Nut size range | M5–M10 by tooling |
|---|---|
| Bowl capacity | approx. 3,000 nuts (reference) |
| Placement | pneumatic, interlocked with weld timer |
| Control | PLC with low-level and jam detection |
| Air supply | 0.5–0.7 MPa, dry |
| Power | single-phase 220 V |
| Weight | 120 kg (reference) |
Reference values for this series. Final values are confirmed on the order confirmation.
Where it is used

Brackets, seat frames and body panels are welded on coated and high-strength steel, where weld time has to stay short and the nugget still has to pass peel and chisel checks.
View application
Appliance panels, housings and shelves combine spot welds on visible surfaces with projection-welded nuts inside the part, so electrode marking and nut position both matter.
View applicationRelated equipment

Automated lines and feeding
Automatic gantry wire mesh welder
Servo pitch control across a full mesh width

MFDC spot welders
MFDC spot welder
Short weld times on coated and high-strength steel